A1 Sealer Plus Matt

A1 Sealer PLUS is a water-borne coating system to protect the A1 object from weather influences such as moisture and UV radiation.
All objects in an outdoor environment are subjected to weather influences that have an erosive effect on the A1 object. Our A1 Sealer PLUS has a protective effect against these influences.

There is a choice of A1 Sealer PLUS Matt, Satin and Gloss. For the most matte result we recommend first applying a layer with the A1 Sealer PLUS Satin and then a layer with A1 Sealer PLUS Matt.

The advantages are:

• 1 component
• solvent-free
• water-based
• quick-drying
• easy to apply
• good UV resistance
• excellent adhesion
• protection against dirt absorption and good protection against moisture

Data:

• Min. processing temperature: 10°C
• Average consumption: 8-10 m2 per litre
• Storage life: 1 year in closed package
• Storage: Store frost-free and out of direct sunlight

Application of A1 Sealer PLUS
1. The surface to be sealed must be free of wax, oil, dirt or dust.
2. Apply with a brush, roller, or by spray.
3. When spraying, we recommend adding 20% water.
4. After application, the A1 Sealer PLUS should be rubbed out with a dry cloth when it is still damp. When spraying the A1 Sealer PLUS it is not necessary to polish the A1 Sealer PLUS.
5. Each layer has a drying time of 15 to 45 minutes, which also depends on temperature and humidity.
6. A1 Sealer PLUS may be applied in 1 to a maximum of 3 layers to improve the protective properties.

The A1 Sealer PLUS is a so-called breathable coating. In addition to any residual moisture after production, A1 absorbs water to a limited extent if placed in a highly humid environment and this water is also (many times faster) released again in a dry environment.

With the help of this breathable (vapour open) A1 Sealer PLUS any remaining and/or absorbed moisture can easily leave the A1 object. Therefore, avoid applying too thick a layer of A1 Sealer PLUS as this may close the A1 object.

The consumption of the A1 Sealer PLUS per kg applied by brush is 8 to 10 m2 .
The consumption for spraying the A1 Sealer PLUS per kg is 10 to 12 m2.

Lifespan
We recommend reapplying the A1 Sealer PLUS every 6 years. Furthermore, we recommend that you check the A1 object annually for possible damage to the A1 Sealer PLUS so that it can be repaired immediately. This inspection is also a good opportunity to clean the A1 object if necessary.

 Click here to watch a video on how to use A1 Sealer PLUS:

Avoid applying thick layers of A1 Sealer PLUS, as this will seal the A1 object. Thinner layers will also avoid the risk of whitening.

Tip: For the most matt result, we recommend that a layer of A1 Sealer PLUS Gloss is applied first, followed by a layer of A1 Sealer PLUS Matt.

A1 MANUAL
Do you want to know more about A1 (Acrylic One)?  Download our A1 Manual.

A1 ACADEMY
On the A1 ACADEMY you will find a lot of information and frequent asked questions by our customers.